MKN Electric Griddle Pan 800 Size 2 37.00 l 800 x 850 x 750 mm – New Optima 850, Connected Load 10.00 kW

MKN Electric Griddle Pan 800 Size 2 37.00 l / 800 x 850 x 750 mm

New Optima 850

Construction:

• Housing and lid are made entirely of stainless steel 1.4301 / AISI 304
• visible surfaces ground and matte brushed, grain size 320
• torsion-resistant, self-supporting, closed construction: with side walls, rear wall and base
• Lid with 45° slope on the underside at the front as a drip edge, sides bent up by 90° by 50 mm and rear bent up by 90° by 40 mm
• 30 mm Top plate overhang closed to the body
• sides with tightly welded drain troughs, front execution with 45° slope - rear rounded (R 30)
• Multi Safe Connect - easy-to-install system for sealing and connecting adjacent units using the Multi Safe Connect bridge (optional accessory), with thermal separation, integrated liquid barrier, allows easy movement of cookware at top plate level
• Hygiene cabinet space H2, closed on three sides - all corners and edges rounded (R20)
• standardly prepared for the installation of (optional) height-adjustable unit or flange feet, 4 castors, 2 rollers (rear) and 2 feet (150 mm, front)
• additionally, the unit can be optionally prepared for the installation of height-adjustable plinth feet or for mounting on an installation bridge
• Unit internally fully electrically wired for on-site fixed electrical connection, all contactors required for operation are installed
• IPX6 - Protection against powerful water jets
• requires fixed electrical connection
• Griddle pan 100 mm deep with griddle plate featuring large, easy-to-clean radii
• seamless and fat-tight, welded into the lid in a recessed manner
• front with closable fat drain opening
• Unit with one or two separately electronically controlled heating zone(s)
• Griddle plate fine-ground, with PowerBlock sandwich griddle base
• PowerBlock sandwich griddle base consisting of 3 mm thick stainless steel 1.4404 with extreme corrosion resistance and 12 mm thick under-plated high-heat-resistant steel 1.5415 for heat storage

Operation:

• Control panel with toggle ram protection to protect the operating elements
• Control panel removable from the front for simple and cost-effective service access
• MKN-Stainless steel premium toggle, ergonomically shaped for easy position recognition
• embossed toggle seat prevents ingress of liquids
• Control and design concept OPTIMA Control
• intuitive and digital-manual - OPTIMA Control with OPTIMA Pilot in symbiosis - toggle and electronics intelligently combined
• Display with robust 6 mm safety glass, large display and ideal placement for good readability from all directions
• Garden temperature adjustable to the exact degree (degree step settings configurable in 1°C, 5°C or 10°C)
• adjustable temperature ranges (min./max.)
• Residual heat display

Heating:

• Surface heating system directly under the base, flush-connected
• 8 mm Aluminium plate for even heat distribution with precisely milled grooves for the stainless steel tube heaters for optimal and rapid heat transfer
• Tube heaters individually screwed for easy service

Options:

• wall-hung
• Unit feet 100 mm or 150 mm height-adjustable
• Flange feet 150 mm › Plinth installation incl. height-adjustable plinth feet
• mobile (4 castors, 2 of which lockable)
• 2 rollers (rear), 2 feet (150 mm, front)
• EOA interface according to DIN 18875
• potential-free contact
• Phase failure monitoring
• ChefsHelp Signal
• Interface-Pack with EOA interface, potential-free contact, phase failure monitoring and ChefsHelp Signal
• Fire protection interface
• WLAN (MKN Connected Kitchen)
• Hinged doors (up to 600 mm optionally with right- or left-hinged door)
• external SousVide probe
• external multi-point probe
• external multi-point probe Heavy Duty
• Drainage system incl. GN 1/1 container and splash guard, open, without door
• Connection cable with CEE plug
• Handle bar / Handrail 20 x 40 mm
• Bord 80 x 40 mm
• MKN SteelPlus - CO₂e-reduced stainless steel